Vibration and Steel Joists (12:30pm – 2pm Eastern)
Guide to Understanding a Project Geotechnical Report (12:30pm – 2pm Eastern)
Seismic Design – Appropriate Implementation of the Overstrength Omega o Factor (12:30pm – 2pm Eastern)
2025 Engineering Ethics Update (12:30pm – 1:30pm Eastern)
SEU BIM Forum: What’s New in Revit 2025 (12:30pm – 1:30pm Eastern)
Identifying, Evaluating, and Correcting Punching Shear Deficiencies in Flat Plate Construction (12:30pm – 2pm Eastern)
Masonry Design and Detailing – Using Your Owner’s Money Wisely
New Provisions for Qualification and Design of Post-Installed Adhesive Anchors into Cracked and Uncracked Masonry
SEU BIM Forum: Autodesk Construction Cloud in Revit 2024 – Part 2
Temperature Effects in Steel Structures
Concentrated and Non-Uniform Loading on Steel Deck
Mass Timber Structural Design
SEU BIM Forum: Autodesk Construction Cloud Using Revit 2024
2024 Engineering Ethics Update: Engineers’ Duty to Report
Building Envelope Deterioration Investigation and Repair Part II
Building Envelope Deterioration Investigation and Repair Part I
External Elevated Elements (EEE): Are You Sure That Your Balcony Is Safe?
Tornado Shelter Design with Masonry
Understanding and Avoiding Costly Repairs of Precast Prestressed Thin Slab Parking Structures
Lateral Load Resisting Frames using Steel Joists and Joist Girders
SEU BIM Forum: What’s New in Revit 2024
Vertical Bracing
Rules of Thumb for Steel Design (One Hour Session)
SEU BIM Forum: Controlling Object Appearance in Revit 2023
It is Better to Bend than Break: Retrofitting with BRB and Steel
Diaphragms Are More Than Just Deck And Fasteners
ASCE 7 Frequently Asked Questions (Seismic)
Know Your HSS Welds
Adaptive Reuse of the Historic Witherspoon Building
SEU BIM Forum: Creating Groups, Assemblies, & Parts in Revit 2023
Steel Moment Frames: Design Principles & AISC 341/358 Provisions
2023 Engineering Ethics Update: Conflicts of Interest
What a Structural Engineer Should Know About Resilience
REBROADCAST – South Florida Pedestrian Bridge Collapse Forensic Investigation
Cold-Formed Steel Standards (2022)
Roof Design with Special Profile Joists
Prequalification & Code Approval of Proprietary Connections
SEU BIM Forum: What’s New in Revit 2023
Verifying Software Results
SEU BIM Forum: Sheet Composition in Revit 2022
South Florida Pedestrian Bridge Collapse Forensic Investigation
Special Design Provisions for Wind and Seismic (SDPWS) 2021 Updates
Base Plates, Embeds, and Disasters, Oh My!
Wind Loads: Updated Frequently Asked Questions
Post-Tensioning Design: Finite Element Method-Based Solutions
SEU BIM Forum: Tips & Tricks in Revit 2022
2022 Engineering Ethics Update: The Ethics of Competition
Serviceability of Concrete Slabs
Bolted HSS Connections
ASCE 7-16 Wind (plus Updates)
Bridging and Steel Joists
SEU BIM Forum: Tips & Tricks in Revit Structure: What’s New in Revit 2022 & 2022.1
Camber – Design and Construction
Concrete Flat Plate Design
SEU BIM Forum: Tips and Tricks in Revit 2021 – Coordinating with Other Disciplines
Movement Joints for Masonry – Structural Edition
Design Methodology and Calculations using Fiber-Reinforced Polymer Systems
Structural Fire Engineering
Serviceability for the Practicing Engineer
Structural Engineering of Light-Frame Wood Over Concrete Podium Structures
Blast-Resistant Design of Buildings
Tips & Tricks in Revit Structure – Structural Columns, Foundations, and Floors in Revit Structure 2021
Engineering Ethics Update: The New Model Code
Navigating AISC 360-16 HSS Connection Design
Steel Deck Design for Concentrated and Non-Uniform Loading
New Methods for Ponding Analysis of Open Web Steel Joist Roofs
Tips & Tricks in Revit Structure – What’s New in Revit 2021
Sustaining Structures: Embodied Carbon
Concrete Mix Design
Tips & Tricks in Revit Structure – Beams and Braces in Revit Structure
Seven Deadly Email Sins
What Your Fabricator Wishes You Knew About HSS
Steel Framed Floor Design for Vibration-Sensitive Equipment
Tips & Tricks in Revit Structure – Truss Options within Revit Structure
Town Hall #2 with Betsy Werra
Practical Strategies for the Modeling and Analysis of Diaphragms
Town Hall Session with Betsy Werra
Masonry Checklist: Reviewing Structural Drawings
Engineering Ethics Update: Fiduciary Duties
Tips & Tricks in Revit Structure – Wall Options within Revit 2020
Steel Fiber Reinforced Concrete
Delegated Design: Addressing Potential Risks with Proper Project Management
Developing Effective Communication Skills for Structural Engineers
Wind Loads on Non-Building Structures
Tips & Tricks in Revit Structure – What’s New in Revit 2020
Retrofitting of Existing Buildings with Steel Joists
Changes to the Seismic Design of Steel Structures
Revit for Structural Engineers Part III – Visibility Settings & Printing in Revit 2019
Introducing Design Guide 21: Welded Connections (Second Edition)
Revit for Structural Engineers Part II – Graphics Displays, Views & Sheets in Revit 2019
Engineering Tilt-Up: Design Provisions Born from Past Experiences
Revit for Structural Engineers Part I – Navigating in Revit Structure
2018 National Design Specification (NDS) Changes
Built-Up Member Design (Cold-Formed Steel)
Lintels for Masonry Walls
Tips & Tricks in Revit Structure – Materials in Revit 2019
Avoiding Vibration Issues in Your Structure
Engineering Ethics Update & Miscellany
HSS Truss Connections: The Ts, Ks, and Ys Of It All
Updates to the Seismic Provisions in ASCE 7-16
ASCE 7-16 Wind Provisions – Changes Affecting the Design Provisions
Tips & Tricks in Revit Structure – What’s New in Revit 2019 and Revit 2019.1
Improving Clarity, Coherence, and Conciseness in Technical Writing
Anchors: Design Examples and Qualification/Certification/Inspection
Challenges of Proposed Requirements for Mitigating Thermal Bridges in ANSI/ASHRAE/IES Standard 90.1
Behavior and Design of Anchors in Concrete
Project Quality and Inspection Requirements
Steel Deck Diaphragm Attachment
Tips & Tricks in Revit Structure – Datum Elements
Frame for Success – Best Practices for Wood Buildings
Engineering Law and Ethics Case Studies
Classical Design Methods
Tips & Tricks in Revit Structure – Understanding Keynotes in Revit Structure 2018.
Introduction to the Design and Cost of Steel Seismic Connections (Braced Frames)
Selecting the Appropriate Seismic System for Your Steel Project
Tornado Shelter Design
Validating Software Results
Tips & Tricks in Revit Structure – What’s New in Revit 2018
Post-Tensioned Concrete Analysis and Design
Code Provisions for Post-Installed Adhesive Anchors into Concrete
Digital Presence for Engineers: What are Your Emails Really Saying?
Buckling Restrained Braced Frames
Moment Frames: Design and Detailing per AISC 341 and 358
Tips & Tricks in Revit Structure – 3D Sections & Details
The Chevron Effect – A Paradigm Shift in Approach to Analysis
2015 National Design Specification® (NDS®) for Wood Construction – Significant Changes Including Cross-laminated Timber
Tips & Tricks in Revit Structure – Creating Custom 2D Drafting Details
Masonry Movement Joints from a Structural and Architectural Perspective
Welding Myths that Structural Engineers Need to Know About
A Case Study, and Legal Perspectives, on Engineering Ethics: The Kansas City Hyatt
Structural Irregularities per the ASCE7-10 Seismic Design Requirements
Tips & Tricks in Revit Structure – Enhancements in Revit Structure 2017
Structural Applications for Steel Castings
The Indiana State Fair Collapse Incident
Advanced Topics in Composite Steel Beam Design: Retrofit, Slab Openings, and Changes to Minimum Percent Composite
Design Aids and Design Examples for Cold-Formed Steel
Effective Communication Skills for Workplace Conversations and Meetings
Advancements in Force Transfer Around Openings for Wood Framed Shear Walls
Tips and Tricks in Revit Structure 2016: Visibility/Graphics, Families, and Other Settings/Tools
Best Practices to Improve Structural Construction Documents
Masonry Analysis and Design with FEA Software
Evaluation and Repair of Precast and Post-Tensioned Concrete Parking Structures
Tips and Tricks in Revit Structure 2016: User Interface, Linked Files, and Dimensions
Implementation of the ISC Physical Security Design Requirements for Federal Buildings
Ethics for Structural Engineers – Lessons in Negligence & Incompetence (Parts I and II)
Vibration of Reinforced Concrete Floor Systems – Part II
Vibration of Reinforced Concrete Floor Systems – Part I
Clarifying Frequently Misunderstood Seismic Provisions
New Features in Revit Structure Versions 2015 R2 and2016
Understanding Load Paths
Clarifying Frequently Misunderstood Wind Provisions
Designing Slides for Effective Project Presentations
Flexural Design of Single Angle Members
Software Default Settings and Effects on Structural Models (RAM Structural System)
Mat Foundations and Soil Structure Interaction
Increasing Your Efficiency With Revit Structure: Understanding Visibility Options in Revit Structure 2015
Checklists to Assist the Structural Engineer During Construction Administration
Concrete Slabs on Grade: Analysis, Design, and Detailing
Workflow for Effective Project Collaboration Using Revit Structure 2015
Load Transfer Through Shear Walls
Load Transfer Through Diaphragms
Concrete Mix Design & Admixtures: Producing High Performance Structural Concrete
Guidelines for Reviewing Concrete Mix Designs
Ethics in the Professional Practice of Engineering
Increasing Your Efficiency With Revit Structure: All About Parameters
Designing for ASCE 7 Wind Loads – Components & Cladding
Designing for ASCE 7 Wind Loads – Main Wind Force Resisting System
Increasing Your Efficiency With Revit Structure: Customizing Standard Families
Using Tuned Mass Dampers to Control Floor Vibrations
Legal Issues Impacting Shop Drawing Review
Frequently Asked Questions About Cold-Formed Steel
Rules of Thumb for Industrial Building Design
Increasing Your Efficiency With Revit Structure: New and Improved Features in Revit Structure 2014
Checklists for the Quality Assurance of Calculations, Design, and Drawing Production
Seismic Design of Reinforced Concrete: Special Moment Frames
Truss and Bracing Connections for HSS Members; HSS Series #2
Increasing Your Efficiency With Revit Structure: Working With Schedules
Moment Connections to HSS Columns; HSS Series #1
Design of Maintenance Access and Fall Protection Systems for New and Existing Buildings
Seismic Design of Buildings, Including Industrial Structures
Increasing Your Efficiency With Revit Structure: Project Phases and Design Options
Improving Your Writing Skills as a Structural Engineer
ASCE 7 Ponding and Roof Drainage: Not My Problem…Maybe
Increasing Your Efficiency With Revit Structure: View Graphics and Visual Styles
Bracing Masonry Walls Under Construction
Structural Fire Protection
Force Transfer Around Openings for Wood Shear Walls
Navigating in Revit Structure – Tips for the Periodic User
Engineering Ethics: A Case Study on the Kansas City Hyatt Hotel Collapse
IBC Special Inspections – Managing the Process
Increasing Your Efficiency with Revit Structure: Custom Components
Design Issues When Specifying Open Web Steel Joists and Joist Girders: An Engineer’s Guide
Designing Lateral Load Resisting Frames Using Open Web Steel Joists and Joist Girders: An Engineer’s Guide
Designing with Open Web Steel Joists and Joist Girders: An Introduction
Conflict Resolution: An Introduction for Engineers
ACI Appendix D – Updates for ACI 318-11
Practical Design of Post-Tensioned Floors
Behavior, Analysis, and Design of Post-Tensioned Floors
How to Read and Understand a Geotechnical Report
Increasing your Efficiency with Revit Structure: 2D Elements (Part II)
Case Study for Wood Design: Five Story Mixed-Use over Two Story Below-Grade Parking
Floor Vibrations Due to Human Activities
Masonry Building Design: An Overview of Masonry Building Design Methods
Interoperability: Using Analysis Software with BIM Tools
Fundamentals of Blast Design
Increasing your Efficiency with Revit Structure: 2D Elements
ASCE7-10: Modifications to Wind Loading Requirements
Structural Inspections After an Earthquake: Case Studies from the Mineral, VA Event
To Do or Not To Do: Engineering Ethics
Cold-Formed Steel Design – Design Standards, Part II
Cold-Formed Steel Design – Design Standards, Part I
Overview of Cold-Formed Steel Design
Collaboration with Revit Structure: Worksharing
Accurate Long-Term Deflection Predictions for Concrete Structures
ASCE 7-10: General Seismic Design Requirements for Buildings
Best Practices for Modeling Diaphragms
Diaphragm Considerations for Structural Engineers
Creating Trusses in Revit Structure 2012 (Intermediate)
Interpersonal Communication for Structural Engineers
More on Creating Revit Structure Families
Understanding and Detailing for Wood Shrinkage
Malpractice: A Tort Primer for Structural Engineers
Seismic Considerations for Non-Structural Elements
Ethics: A Case Study for Structural Engineers
Geotechnical Considerations for Structural Engineers
What’s New in Revit Structure 2012
Design of Tilt-up Wall Systems
Best Practices for BIM Infrastructure
Being Successful in Your Firm; 6 Important Steps to Help You and Your Company
Creating a Proper Analytical Model in Revit Structure
Understanding Dynamic Analysis
Creating Standard Template Files for Revit Structure
Steel Connection Design for High Seismic Loading (Part II)
Steel Connection Design for High Seismic Loading (Part I)
Revit Structure Families…Need I Say More?
Understanding Steel Connections, Including Seismic R=3
Design of Buildings to Resist Progressive Collapse; Revised DoD UFC 4-023-03
Increasing Efficiency with Revit Structure – How Revit Extensions for Autodesk Revit Structure can Help Improve Productivity
Legal and Risk Issues in Building Information Modeling (BIM)
Increasing Efficiency with Revit Structure – Creating Construction Documents Using Revit Structure
Managing Multiple Priorities: Improving your Time Management Skills as a Structural Engineer
Increasing Efficiency with Revit Structure – Collaborating your Revit Structure Model with the Entire Design Team
Key Considerations for the Attachment of Facades to Structures
Improving Written Communication Skills for Structural Engineers
Best Practices for Integrating the RISA Building System with Revit Structure
Best Practices for Integrating the RAM Structural System with Revit Structure
Understanding the Direct Analysis Method in the AISC 13th Edition Manual
Understanding ACI Appendix D – Anchorage for Cast-in-Place and Post-Installed Anchors (Part II)
Understanding ACI Appendix D – Anchorage for Cast-in-Place and Post-Installed Anchors (Part I)
I’ll Volunteer to Review the Shop Drawings
AISC 360-05 Implementation in RAM Frame – Critical Items
Implementing a Software Error Reduction Plan (SERP) for your Company
Vibration and Steel Joists (12:30pm – 2pm Eastern)
12:30 – 2:00PM EDT
1.5 PDH
THIS SESSION HAS BEEN CHANGED FROM MAY 11TH TO MAY 17TH (A TUESDAY) DUE TO AN SE SOLUTIONS SCHEDULING CONFLICT
Speaker: Emily M. Guglielmo, SE, PE / Martin/Martin Consulting Engineers
This SEU Core Session on wind load design will discuss a number of frequently encountered situations, and how to use current research and codes to address these designs safely and efficiently. Topics will include:
Registration and handout emails for this session will be sent to SE University companies on Friday, May 13th.
Current SE University subscribers can access the recording in their SEU Resource Center account. Please use the link below to view the session page in the SEU Session Library.
SEU is a program of SE Solutions, LLC. SE Solutions, LLC is not an educational institution, but rather provides continuing education to structural engineers.